Hydraulic press

About equipment
Parameters
The compact and quiet license plate press is a unique development of AVTOVIN.

Using it in conjunction with our integrated software system, allows you to control the printing on this press, and also helps to avoid operator defects and errors.

The stamping speed on our press is 350 plate plates per hour.
Basic parameters
  • Productivity - 350 platinum per hour
  • Maximum power - 1.2 kW
  • Consumption ~ 220V, 50Hz
  • Weight - 280 kg
  • Overall dimensions - 795 x 385 x 595
  • The punching time is 2.8 seconds
  • Stamping force - 30t
  • Operating area - 2 square meters
  • USB PORT – available
  • Detailed description
About equipment
The compact and quiet license plate press is a unique development of AVTOVIN.

Using it in conjunction with our integrated software system, allows you to control the printing on this press, and also helps to avoid operator defects and errors.

The stamping speed on our press is 350 plate plates per hour.
Parameters
  • Productivity - 350 platinum per hour
  • Maximum power - 1.2 kW
  • Consumption ~ 220V, 50Hz
  • Weight - 280 kg
  • Overall dimensions - 795 x 385 x 595
  • The punching time is 2.8 seconds
  • Stamping force - 30t
  • Operating area - 2 square meters
  • USB PORT – available
  • Detailed description

Detailed description

Compact license plate stamping machine is AVTOVIN's unique development that has a number of advantages over its counterparts on the world market.


Features
  • Integration with software and hardware, thanks to the developed electronics and hydraulics, allows you to control the printing - stamping on this press
  • Avoid operator errors and errors at the time the font was assembled for printing
  • Ability to use without software and hardware
  • Compact press allows you to use it in small areas, only 2 square meters
  • Equipment suitable for both batch production and license plate duplication
  • Reasonable price
The basis of the press is a body made of high quality steel profiles. Hydraulic motors with worktop attached to the case with the entire hydraulic system, as well as the electric box. The lower body profile is the basis for hydraulic motors. Also there is table attached to the worktop, behind which moves a special typeface frame with a set of letter-stamps.

Starting the stamping process is possible only by inserting a typeface frame into the working surface of the press. The press is actuated by a magnetic actuator. The stamping process is controlled by a pressure regulator that shuts off the pump after reaching the set pressure.

Additional protection is the overflow valve, which directs the oil to the tank if the pressure reaches the maximum safe value point for system, as well as the limit switch, which protects against exceeding the maximum safe clearance in the working surface of the press.

The maximum pressure set on the pressure regulator shall not exceed 165 bar. Higher pressure can cause damage to the hydraulic pump system or the electric motor.
Other equipment
Other equipment

We invite you for collaboration

Рartner can choose one of the options for cooperation with AVTOVIN and get the equipment for usage
Read more >>
We invite you for collaboration
Contact us, we will be happy
to answer all your questions
© 2020 AVTOVIN
Ukraine, 58023
Chernivtsi, 3b Komunalnykiv St.
+38 050 376 55 77
export@avtovin.com.ua